Diamond-Like Carbon Coating Reduces Connection Screw Head Stripping After Multiple Tightening Instances.

The stability of implant-abutment joint is fundamental for the long-term success of implant rehabilitation. The screw loosening, fracture, and head deformation are among the most common mechanical complications. Several surface treatments of titanium screws have been proposed to improve their resistance and stability. Diamond-like carbon (DLC) coating of the materials is widely used to increase their wear resistance and durability. The present study aimed to evaluate the effect of carbon fiber coating on the screw head on screw removal torque and screw head stripping. One hundred titanium implant screws were used, 50 without coating (Group 1) and 50 with DLC coating of the screw head (Group 2). Each screw was tightened with a torque of 25 Ncm and unscrewed 10 times. The removal torque was measured with a digital cap torque tester for each loosening. Optical 3d measurement of the screw head surface was performed by a fully automatic machine before and after multiple tightening to investigate surface modifications. The reverse torque values decreased with repeated tightening and loosening cycles in both groups without significant differences (P > .05). Optical measurements of surface dimensions revealed average changes of 0.0357 mm in Group 1 and 0.02312 mm in Group 2, which resulted to be statistically significant (P < .001). The DLC coating of the retention screw head can prevent its distortion and wear, especially after multiple tightening.

Fiber-Reinforced Composites for Full-Arch Implant-Supported Rehabilitations: An In Vitro Study.

Background: Fiber-reinforced composites (FRCs) have been proposed as an alternative to traditional metal alloys for the realization of frameworks in full-arch implant-supported prostheses. The aim of the present in vitro study was to evaluate the deflection under load of seven prostheses endowed with frameworks made of different materials, including different types of fiber-reinforced composites (FRCs). Methods: A master cast with four implant analogues in correspondence with the two lateral incisors and the two first molars was used to create full-arch fixed prostheses with the same shape and different materials. Prostheses were made of the following different materials (framework+veneering material): gold alloy+resin (Au+R), titanium+resin (Ti+R), FRC with multidirectional carbon fibers+resin (ICFRC+AR), FRC with unidirectional carbon fibers+composite (UCFRC+C), FRC with glass fibers+resin (GFRC+AR), FRC with glass fibers+composite (GFRC+C), and resin (R, fully acrylic prosthesis). Flexural tests were conducted using a Zwick/Roell Z 0.5 machine, and the deflection of the lower surface of the prosthesis was measured in order to obtain load/deflection graphs. Results: Greater rigidity and less deflection were recorded for UCFRC+C and GFRC+C, followed by Ti+R and Au+R. The greatest deformations were observed for resin alone, ICFRC+R, and GFRC+R. The results were slightly different in the incisal region, probably due to the greater amount of veneering material in this area. Conclusions: When used to realize full-arch frameworks, Au and Ti allow for predictable mechanical behavior with gradual deformations with increasing load. UCFRC also demonstrated good outcomes and less deflection than ICFRCs when loaded. The GFRC full-arch framework may be a valid alternative, although it showed greater deflections. Further studies are needed in order to evaluate how different prosthesis designs and material thicknesses might affect the outcomes.

Peri-implant Tissue Health and Bone Resorption in Implant- Supported Fixed Partial Rehabilitations.

PURPOSE: To evaluate peri-implant tissue health and bone resorption in patients with implant-supported fixed partial rehabilitations. In particular, possible correlations between plaque accumulation and bone loss, as well as other periimplant health parameters, were investigated. MATERIALS AND METHODS: A total of 44 patients rehabilitated with fixed implant-supported partial rehabilitations were included. The following parameters were recorded: spontaneous bleeding (SB), suppuration, bleeding on probing (BOP), plaque index (PI), and probing depth (PD). Periapical radiographs were taken to measure crestal bone loss (BL). A nonparametric test (Spearman rank coefficient; rs) was used to identify possible correlations between the clinical parameters recorded. RESULTS: A total of 121 implants were analyzed. Global PI and BOP were 49.58% and 20.25%, respectively. There were no cases of suppuration, and only 2 implants showed spontaneous bleeding. Mean BL was 1.53 mm (SD: 0.98). No implants showed peri-implantitis. There was a weak, statistically significant correlation between PI and BL (rs = 0.27, P [2-tailed] = .99) and between PI and the other peri-implant parameters (BOP: rs = 0.14, P = .14; PD: rs = 0.04, P = .65; SB: rs = -0.08, P = .34). A very weak correlation was also found between BL and BOP (rs = 0.1, P = .2) and between BL and PD (rs = 0.02, P = .7). Correlation was found between BL and age (rs = 0.13, P = .81) and between the other peri-implant parameters and age using dichotomization (> or < 65 years; PI: rs = -0.14, P = .11; PD: rs = -0.21, P = .01; BOP: rs = -0.21, P = .01; SB: rs = 0.05, P = .53). No statistically significant correlations were found between the clinical parameters evaluated and the sex or the dental arch treated (maxilla vs mandible). In contrast, the correlation between periodontal parameters and years elapsed since surgery (follow-up) was significant. CONCLUSIONS: The present research suggests that in implant-supported fixed partial rehabilitations, dental implants with greater plaque accumulation are more likely to present augmented probing depth, peri-implant inflammation, and bone loss, although the correlation is statistically very weak. Patient age and time of follow-up also significantly affected peri-implant health parameters.

Vacuum Plasma Treatment Device for Enhancing Fibroblast Activity on Machined and Rough Titanium Surfaces.

This study was conducted to compare the effects of an innovative plasma surface treatment device that does not need a gas supply for titanium disks with two different surface topographies: the prototypical machined surface (MAC) and one of the most diffused roughened ones (SL) obtained through grit blasting and acid etching. A total of 200-MAC and 200-SL titanium disks were used. Each group of disks was divided into four sub-groups of 40 samples each that were subjected to five different tests. Among these, 150-MAC and 150-SL were considered the test group, and they were treated with plasma for 15, 30, and 60 s after being removed from the sterile packaging. On the other hand, 50-MAC and 50-SL were considered the control group, and they were only removed from sterile plastic vials. The samples were analyzed to evaluate the capability of the plasma treatment in influencing protein adsorption, cell adhesion, proliferation, and microbial growth on the test group disks when compared to the untreated disks. Protein adsorption was significantly enhanced after 20 min of plasma treatment for 15 and 30 s on the MAC and SL disks. Plasma treatment for 15 and 30 s significantly increased the level of adhesion in both treated samples after 30 min. Furthermore, the MAC samples showed a significant increase in cell adhesion 4 h after plasma treatment for 15 s. The SEM analysis highlighted that, on the treated samples (especially on the MAC disks), the cells with a polygonal and flat shape prevailed, while the fusiform- and globular-shaped cells were rare. The encouraging results obtained further confirm the effectiveness of plasma treatments on cell adhesion and fibroblast activity.

Effect of auxiliary geometric devices on the accuracy of intraoral scans in full-arch implant-supported rehabilitations: An in vitro study.

OBJECTIVES: The aim of the present in vitro study was to evaluate the effect of a novel auxiliary geometric device (AGD) on the accuracy of full-arch scans captured with 3 different intraoral scanners (IOS). METHODS: An edentulous maxillary model with four internal connection implant replicas was scanned using 3 different IOS: iTero Element 5D (ITERO) (Align Technology, Tempe, AZ, USA), Trios 4 (TRIOS) (3Shape A/S, Copenhagen, Denmark), and Carestream 3700 (CS) (Carestream Dental, Atlanta, USA). Thirty-six scans were taken with each IOS, 18 with the AGD in place, and 18 without the AGD. A digital master model was created using an industrial optical scanner (ATOS compact Scan 5M, GOM GmbH, Braunschweig, Germany). The master and IOS models were aligned using the scan bodies as a reference area. A surface comparison was performed, and deviation labels were exported for each scan body to evaluate the linear and angular deviation. Total body, platform and angular deviations were measured. RESULTS: The use of AGD resulted in a statistically significant increase of angular deviation: 0.87° (SD=0.21) in the AGD group versus 0.64° (SD=0.46) in the no AGD group (p-value=0.005). The difference between the AGD and no AGD groups was not statistically significant for total body and platform deviation values (p-value=0.051 and 0.302 respectively). Using AGD, ITERO showed a statistically significant increase in angular deviation (mean difference=-0.46 µm, p-value=0.002) and a decrease in mean platform deviation (mean difference=63.19 µm, p-value<0.001). No statistically significant differences were found for the other IOS. CONCLUSIONS: The use of AGD did not add benefit on CS and TRIOS. On ITERO, there was an improvement in platform deviation, that was outweighed by the worsening of the angular deviation. CLINICAL SIGNIFICANCE: In vitro data suggest that intraoral scans can be successfully used in full-arch cases. The use of AGD has no additional benefit on CS and TRIOS. On ITERO there was an improvement in platform deviation that was outweighed by the worsening of the angular deviation. Translational application to clinical practice deserves further investigation, taking into account patient-related and anatomical variables.

Antimicrobial Activity of Glycine Air Polishing: A Clinical Split- Mouth Study on Full-Arch Implant-Supported Rehabilitations.

PURPOSE: To investigate the possible antimicrobial activity of glycine air polishing by comparing peri-implant microbiota before and after treatment. MATERIALS AND METHODS: A total of 15 patients who received implant-supported full-arch fixed rehabilitations were included. After prosthesis removal (T0), Plaque Index (PI), probing depth (PD), and bleeding on probing (BOP) were recorded. In each hemiarch, the implant with the highest PD score was selected for microbiologic sample collection from the peri-implant sulcus (T0). All patients received two different hygienic protocols (randomly administered, one per each hemiarch): glycine air-polishing (G) and cleansing with cotton pellets soaked in saline (C). At 7 days (T1) and 3 months (T2) after the intervention, PI and BOP were recorded, and new microbiologic samples were taken. Traditional polymerase chain reaction (PCR) and quantitative PCR real-time were employed for microbiologic analysis to investigate how the presence of different bacterial species varied according to the hygienic treatment performed. RESULTS: Treatment G provided a significantly higher PI score reduction around implants compared to treatment C (P = .015). No statistical difference was found in the microbial population around G and C implant sites, with Tannerella forsythia being the most commonly detected bacterial species in both G and C groups. No statistical differences were found between the antimicrobial activity of treatments C and G. CONCLUSIONS: Glycine powder air polishing is a valid method for professional hygienic care of implants and was more effective in PI reduction compared to the control treatment. However, its antimicrobial efficacy cannot be confirmed by the outcomes of the present study.

Diamond-like carbon coating reduces connection screw head stripping after multiple tightening.

The stability of implant-abutment joint is fundamental for the long-term success of implant rehabilitation. The screw loosening, fracture, and head deformation are among the most common mechanical complications. Several surface treatments of titanium screws have been proposed to improve their resistance and stability. Diamond-like carbon (DLC) coating of the materials is widely used to increase their wear resistance and durability. The present study aimed to evaluate the effect of carbon fiber coating on the screw head on screw removal torque and screw head stripping. One hundred titanium implant screws were used, 50 without coating (Group 1) and 50 with DLC coating of the screw head (Group 2). Each screw was tightened with a torque of 25Ncm and unscrewed ten times. The removal torque was measured with a digital cap torque tester for each loosening. Optical 3d measurement of the screw head surface was performed by a fully automatic machine before and after multiple tightening to investigate surface modifications. The reverse torque values decreased with repeated tightening and loosening cycles in both groups without significant differences (p>0.05). Optical measurements of surface dimensions revealed average changes of 0.0357mm in Group 1 and 0.02312mm in Group 2, which resulted to be statistically significant (p<0.001). The DLC coating of the retention screw head can prevent its distortion and wear, especially after multiple tightening.

Five Steps for the Maintenance and Interception of Complications in Zygomatic Implants.

Zygomatic implants are used for the rehabilitation of the upper jaw of patients with severe and moderate bone atrophy. Possible post-surgical complications include soft tissue dehiscence, sinusitis, and prosthodontic fractures, and maintaining an accurate control is crucial. Additionally, zygomatic implants have a unique peri-implant anatomy, making traditional periodontal parameters unsuitable. The present paper aims to provide guidelines for the maintenance and interception of complications in patients rehabilitated with these kinds of implants. The proposed protocol includes: 1. intra/extraoral and temporo-mandibular joint examination; 2. soft tissue and transmucosal path observation with magnifiers; 3. peri-implant health indices and digital stimulation of tissues; 4. examination of prosthodontic devices; and 5. photographic recording. These steps facilitate the comprehensive evaluation and monitoring of clinical conditions of zygomatic-supported rehabilitations, including dehiscence and occlusal wear during follow-up appointments.

Influence of abutment macro- and micro-geometry on morphologic and morphometric features of peri-implant connective tissue.

OBJECTIVES: The aim of the present human observational study is to provide morphologic and morphometric analysis of peri-implant connective tissue next to abutments with divergent or convergent macro-geometry and different surface micro-characteristics. MATERIALS AND METHODS: Thirty patients were rehabilitated with single implants in the posterior area and one out of three different healing abutments with a one-stage technique: machined divergent abutment (DIV-MAC), machined convergent abutment (CONV-MAC) or convergent abutment with ultrathin threaded surface (CONV-UTM). At 3 months postimplant insertion, peri-implant soft tissue was harvested; the following outcomes were investigated: histomorphometry (vertical width of connective and epithelial components) as detected by histology and polarized light; and connective tissue vertical width and 3D organization as detected by synchrotron-based high-resolution phase-contrast-based tomography (PhC-µCT). RESULTS: Significant differences in connective tissue vertical dimension (aJE-AM) were found between DIV-MAC and both CONV-MAC and CONV-UTM, both by histology and PhC-µCT, with significantly higher values for the last two groups. Moreover, 2D histological analysis did not find significant differences in the junctional epithelium vertical dimension (PM-aJE). Importantly, PhC-µCT analysis revealed, at 3D level, significant greater amount and density of collagen bundles for CONV-UTM compared with the other two groups. CONCLUSIONS: Convergent abutment profiles, regardless of their surface micro-geometry, seem to favor axial development of peri-implant connective tissue. Moreover, ultrathin threaded surfaces seem associated with denser and greater connective tissue organization, which might improve peri-implant soft tissue seal.

Three-dimensional analysis of miniscrew position changes during bone-borne expansion in young and late adolescent patients.

INTRODUCTION: Maxillary expansion in patients at the end of their growth relies on the possibility to use miniscrew supported expanders to apply expansion forces directly to the midpalatal suture. Although miniscrews provide a stable anchorage unit, several studies have reported that they do not remain in exactly the same position during treatment. The aim of the present study was to analyze miniscrew position changes after the expansion using bone-borne appliances in late adolescent patients. METHODS: Nineteen patients (13 females, 6 males), with a mean age of 17.81 (SD = 4.66), were treated with a Bone-Borne Expander Device. The appliance was designed with 4 miniscrews: 2 in the anterior palatal area, at the third rugae level; 2 in the posterior area. A CBCT and an intraoral scan were obtained before treatment (T0), and then, a second CBCT was obtained after the expansion (T1). Data on peri-suture bone thickness were collected at T0, then the CBCTs were superimposed, and changes between mini-screws position on T0 and T1 were evaluated, both by linear and angular displacements. RESULTS: Significant longitudinal differences were found in the distance of the head and the tip of miniscrews measured at the occlusal plane, as well as angular changes. Correlations between displacement measurements and peri-suture bone thickness and height measurements were found as well. CONCLUSIONS: While acting as bone anchor units, miniscrews do not remain in the same position during bone-borne expansion. The amount of displacement was related to peri-sutural total bone height and cortical thickness, especially in the anterior area of the naso-frontal maxillary complex.

Immediate loading full-arch rehabilitation using transmucosal tissue-level implants with different variables associated: a one-year observational study.

BACKGROUND: The aim of the present observational study was to investigate the application of transmucosal tissue-level implants in immediate loading full-arch rehabilitation with different variables associated. METHODS: Patients needing a full-arch implant rehabilitation were recruited and rehabilitated with four transmucosal tissue level implants. Data related to implants' diameters and lengths, jaw distributions, and presence of angulated abutments were collected. The following outcomes were evaluated: survival rate, marginal bone loss (MBL), Plaque Index (PI), bleeding on probing (BoP), probing depth (PD). Descriptive statistical analysis was reported and univariate linear regression models were built to assess a significant correlation between MBL and the different implant related factors. RESULTS: Twenty patients were rehabilitated for a total implant number of 80; 11 rehabilitations were performed on the maxilla, while 9 were performed on the mandible; 48 implants presented a 3.8 mm diameter and 32 implants presented a 4.25 mm diameter. Implants length varied between 10 to 15 mm; 40 tilted implants were connected to angulated abutment, while 40 straight implants were connected directly to the prostheses (no abutments). At the one year follow-up visit no implants failed resulting in an implant survival rate of 100%. The overall MBL was 1.19±0.30 mm. No statistically significant difference (P>0.05) was highlighted among any of the subgroups analyzed. CONCLUSIONS: Despite different variables associated, tissue level implants seem to represent a valid option when applied in immediate loading full-arch rehabilitation. Further research and longer observational periods are encouraged to confirm the result.

Evaluation of Prosthetic Marginal Fit and Implant Survival Rates for Conventional and Digital Workflows in Full-Arch Immediate Loading Rehabilitations: A Retrospective Clinical Study.

Digital impression provides several advantages in implant prosthodontics; however, its use in full-arch rehabilitations, especially immediately after surgery, has yet to be validated. The aim of this study was to retrospectively analyse the fit of immediate full-arch prostheses, fabricated using conventional or digital impressions. Patients requiring a full-arch immediate loading rehabilitation were divided into three groups: T1 (digital impression taken immediately after surgery), T2 (Preoperative digital impression, guided surgery-prefabricated temporary bridge) and C (conventional impression taken immediately after surgery). Immediate temporary prostheses were delivered within 24 h after surgery. X-rays were obtained at the time of prosthesis delivery and at the 2-year follow-up. Primary outcomes were cumulative survival rate (CSR) and prosthesis fit. Secondary outcomes were marginal bone level (MBL) and patient satisfaction. One hundred and fifty patients were treated from 2018 to 2020, with 50 in each group. Seven implants failed during the observation period. The CSR was 99% for T1, 98% for T2 and 99.5% for C. A statistically significant difference in prosthesis fit was found among T1 and T2 vs. C. A statistically significant difference was found in the MBL between T1 and C. The outcomes of the present study suggest that digital impression is a viable alternative to conventional protocols for the realisation of full-arch immediate loading prostheses.

Effects of abutment materials on peri-implant soft tissue health and stability: A network meta-analysis.

PURPOSE: This systematic review aimed to evaluate the effect of the abutment material on peri-implant soft tissue health and stability. STUDY SELECTION: An electronic and hand search was conducted until February 2022. Only prospective randomized trials (RCTs) and controlled clinical trials (CCTs) comparing titanium abutments with abutments made of different materials, with a follow-up of at least 6 months, were selected by two independent reviewers. Data on marginal bone loss (MBL) and peri-implant tissue indexes, i.e., plaque index (PI), bleeding on probing (BOP), probing depth (PD), and recession (REC), were collected. The risk of bias for RCTs and non-RCTs was evaluated according to the tool reported in the Cochrane Handbook for Systematic Reviews of Interventions and the ROBINS-I tool, respectively. Both pairwise and network meta-analyses (NMA) were performed. RESULTS: We included 18 relevant studies from 1,437 identified studies. Overall, 612 patients were treated, and 848 abutments were inserted. Five studies presented a low risk of bias. Pairwise meta-analysis showed that, as compared to titanium, zirconia abutments presented a significantly reduced MBL (0.20 mm, 95% Confidence Interval CI [0.14-0.26], P < 0.00001). No significant differences were found for the other outcomes. In the NMA, zirconia abutments demonstrated an 83.3% probability of achieving the highest rank in PI, an 87.0% in BOP, and a 65.0% in PD outcome, suggesting that zirconia abutments generally performed better than titanium and alumina abutments. CONCLUSIONS: Within the limits of the present study, zirconia abutments seem a viable alternative to titanium ones.

Influence of implant diameter on implant survival rate and clinical outcomes in the posterior area: a systematic review and meta-analysis.

OBJECTIVE: The aim of the present systematic review was to test the hypothesis that the diameter of implants inserted in the posterior area affects implant survival rate, prosthetic survival rate and peri-implant parameters (bleeding on probing (BoP), marginal bone loss (MBL), pocket probing depth (PPD)). MATERIALS AND METHODS: An electronic search of studies published until December 2021 was done on three databases (Pubmed, Scopus, Cochrane) independently by two authors. Clinical trials comparing implant survival rate, BoP, MBL and PPD among narrow diameter implants (NDI: ≥ 3.0 mm to < 3.75 mm) and regular diameter implants (RDI ≥ 3.75 mm to < 5 mm) were included. Data were independently extracted by two reviewers. Risk of bias was evaluated according to the Cochrane risk-of-bias tool for randomized studies and to the Joanna Briggs Institute Critical Appraisal tools for non-randomized ones. A pair-wise meta-analysis was conducted on the included studies. RESULTS: Seven articles were included out of the 4291 identified from the digital research. Overall, a total of 939 implants were inserted (319 NDI, 620 RDI). Only one study was judged at serious risk of bias. No statistically significant difference was found in implant survival rate (risk ratio 1.01 (95% CI [0.98 to 1.04], P = 0.67)) while the difference was significant for BoP (mean difference 2.89 (95% CI [0.30 to 5.48] mm, P = 0.03)) with higher values for NDI. Higher MBL was identified among regular diameter implants (mean difference -0.15 mm (95% CI [-0.32 to 0.01 mm], P = 0.07). No statistically significant differences were identified for prosthetic survival and PPD. CONCLUSIONS: No differences were found in implant survival rate between narrow and regular implants. A higher BoP was identified among narrow implants, but there was no higher bone loss. It is not possible to draw definitive conclusions about the use of narrow-diameter implants in the posterior region.

Outcomes of Zygomatic Implants Combined with Anterior Regular Implants: A Retrospective Analysis with a Mean Follow-up Time of 36 Months.

Purpose: To retrospectively evaluate the clinical outcomes of immediately loaded zygomatic implants combined with anterior regular implants (hybrid zygoma) for the fixed rehabilitation of atrophic maxillae. Materials and Methods: A total of 18 patients were enrolled in this study and treated with the hybrid zygoma concept by an experienced surgeon. Follow-up visits were planned after 1 week, 3 weeks, 4 months, 6 months, then annually. At the last follow-up appointment (mean: 36 months after surgery; range: 24 to 52 months), the prostheses were unscrewed and the implants and peri-implant tissues were examined. The primary outcome evaluated was implant success. Following the criteria proposed by Aparicio et al, implant success was classified in five grades, with grade I representing the best condition and grade V representing a failure. At the annual check-up, patients were asked to fill out a questionnaire to evaluate their satisfaction with their oral rehabilitation. Results: A total of 80 implants (34 zygomatic and 46 regular) were inserted. One zygomatic implant was lost in one patient, and two regular implants failed in two other patients. Of the zygomatic implants, 24 (70.6%) presented a success grade I, 9 (26.5%) a success grade II, and 1 (2.9%) a grade V. Sinusitis was the most common biologic complication, occurring in two patients (5.6%). Two patients showed unilateral upper lip paresthesia that was persistent at the last follow-up appointment. According to the annual follow-up visit questionnaire data, 72%, 89%, and 94% of patients declared that they were satisfied with their phonetic ability, chewing ability, and esthetics, respectively. Conclusion: Although zygomatic implants combined with anterior regular implants present a higher risk of complications than traditional implantology, they allow for immediately loaded full-arch fixed rehabilitation of patients with advanced atrophy of the posterior maxilla, which provides satisfactory chewing ability, esthetics, and phonetics.

Implant rehabilitation of the esthetic area: A five-year retrospective study comparing conventional and fully guided surgery.

INTRODUCTION: To compare the clinical outcomes of anterior single maxillary implants placed using conventional or guided implant surgery. METHODS: In this retrospective clinical study 44 patients rehabilitated with a single anterior implant in the maxillary arch were included. Twenty-four implants were inserted applying a guided surgery approach (GS), and 20 applying a conventional freehand approach (CS). Outcome measures were: implant survival rate and complications; mean bone level (MBL) evaluated at surgery (T0), after 6 weeks (6 W), and after 1 year (1Y), 2 years (2Y), 3 years (3Y), 4 years (4Y), and 5 years (5Y); patients' satisfaction evaluated through a questionnaire filled out before surgery (BS) and at 1 week, 6 W, 2Y and 5Y; Pink esthetic score (PES) and white esthetic score (WES) evaluated at 1Y, 3Y and 5 Y. Significance of differences between groups were tested by Fisher's exact test, Mann-Whitney U test, and Wilcoxon's signed rank test. RESULTS: During the 5-year follow-up there were no drop-outs and no implant failed. No significant differences between groups were found in MBL. A significant difference between groups was found in VAS scores regarding speech at 2 years, aesthetics at 6 weeks, confidence at 1 week and 6 weeks, satisfaction at T0 and at 1 W, pain/comfort at 1 W and at 6 W; all VAS scores resulted significantly improved compared to baseline. No significant differences in WES were found, while significant differences in PES scores between CS and GS groups were found at 3 and 5 years (p value = 0.023 and 0.004 respectively) with better outcomes for GS. A significant difference over time was found in PES between 5-year and one-year values. CONCLUSIONS: Guided surgery and conventional surgery implants did not show any difference in MBL during the 5-year observation period. Guided surgical procedure guarantee optimal esthetic outcome and seems able to guarantee better soft tissue result over time, even though more long-term studies are necessary to confirm this data.

Biomarkers from Peri-Implant Crevicular Fluid (PICF) as Predictors of Peri-Implant Bone Loss: A Systematic Review.

The aim of the present systematic review is to summarize current knowledge regarding the analysis of biomarkers extracted from peri-implant crevicular fluid (PICF) as predictors of peri-implant bone loss (BL). An electronic search was conducted on three databases, PubMed/MEDLINE, Cochrane Library, and Google Scholar, to find clinical trials published until 1 December 2022 suitable to answer the following focused question: in patients with dental implants, are biomarkers harvested from PICF predictive of peri-implant BL? The initial search yielded a total of 158 entries. After a full-text review and application of the eligibility criteria, the final selection consisted of nine articles. The risk of bias in included studies was assessed using the Joanna Briggs Institute Critical Appraisal tools (JBI). According to the present systematic review, some inflammatory biomarkers harvested from PICF (collagenase-2, collagenase-3, ALP, EA, gelatinase b, NTx, procalcitonin, IL-1ß, and several miRNAs) seem to be correlated with peri-implant BL and may assist in the early diagnosis of pathological BL, that characterizes peri-implantitis. MiRNA expression demonstrated a predictive potential of peri-implant BL that could be useful for host-targeted preventive and therapeutic purposes. PICF sampling may represent a promising, noninvasive, and repeatable form of liquid biopsy in implant dentistry.

Effect of argon plasma pre-treatment of healing abutments on peri-implant microbiome and soft tissue integration: a proof-of-concept randomized study.

PURPOSE: Biofilm-free implant surface is ultimate prerequisite for successful soft and bone tissue integration. Objective of the study was to estimate the effects of argon plasma healing abutment pre-treatment (PT) on peri-implant soft-tissue phenotype (PiSP), inflammation, plaque accumulation and the microbiome (PiM) between non-treated (NPT) and treated (PT) abutments following 3-months healing period. The hypothesis was that cell-conductive and antimicrobial properties of PT would yield optimal conditions for soft tissue integration. MATERIAL AND METHODS: Two months following second-phase surgery, microbiological and clinical parameters were assessed around thirty-six healing abutments with two types of microtopography, smooth surface (MACHINED) and ultrathin threaded microsurface (ROUGH). A two level randomization schema was used to achieve equal distribution and abutments were randomly divided into rough and machined groups, and then divided into PT and NPT groups. PiM was assessed using next-generation DNA sequencing. RESULTS: PiM bacterial composition was highly diverse already two months post-implantation, consisting of key-stone pathogens, early and late colonizers, while the mycobiome was less diverse. PT was associated with lower plaque accumulation and inflammation without significant impact on PiSP, while in NPT clinical parameters were increased and associated with periopathogens. NPT mostly harbored late colonizers, while PT exerted higher abundance of early colonizers suggesting less advanced plaque formation. Interaction analysis in PT demonstrated S. mitis co-occurrence with pro-healthy Rothia dentocariosa and co-exclusion with Parvimonas micra, Porphyromonas endodontalis and Prevotella oris. PiSP parameters were generally similar between the groups, but significant association between PiM and keratinized mucosa width was observed in both groups, with remarkably more expressed diversity in NPT compared to PT. PT resulted in significantly lower BOP and PI around rough and machined abutments, respectively, without specific effect on PiM and PiSP. CONCLUSIONS: PT contributed to significantly the less advanced biofilm accumulation and inflammation without specific effects on PiSP.

Comparison of Milled Full-Arch Implant-Supported Frameworks Realised with a Full Digital Workflow or from Conventional Impression: A Clinical Study.

BACKGROUND: The aim of the present study was to investigate the accuracy of a new digital impression system, comparing it to the plaster impression technique in the realization of full-arch implant-supported metal frameworks. METHODS: We took 11 scans (8 of the upper maxilla and 3 of the lower jaw) on a sample of nine patients previously rehabilitated with fixed full-arch screw-retained prostheses following the Columbus Bridge Protocol (CBP) with four to six implants (total: 51) since at least 4 months. Two impressions were taken for each dental arch: one analogic plaster impression using pick-up copings and an open tray technique and a second one using an intra-oral scanner. Two milled metal substructures were realised. The precision and passivity of the substructures were clinically analysed through the Sheffield test and endo-oral radiographs. Laboratory scans of the plaster casts obtained from an intra-oral scanner (IOS) and of the plaster casts obtained from traditional impression were compared with the intraoral scans following Hausdorff's method and an industrial digital method of optical detection to measure discrepancies. A Mann-Whitney test was performed in order to investigate average distances between surfaces after the superposition. RESULTS: The Sheffield test demonstrated an excellent passivity of the frameworks obtained through both the digital and the analogic method. In 81.81% of cases (n = 9) both substructures were found to have a perfect fit with excellent passivity, while in 18.18% (n = 2) of cases the substructures were found to have a very slight discrepancy. From the radiographic examination, no gaps between the frameworks and the implant heads or multiunit abutments were observed, with 100% accuracy. By superimposing digital files of scans according to Hausdorff's method, a statistically significant discrepancy (p = 0.006) was found between the digital scans and the digital models obtained from plaster impressions. Three-dimensional optical detection found a mean discrepancy of 0.11 mm between the analogic cast and the cast derived from the digital impression. CONCLUSIONS: The present study clinically demonstrates that milled implant-supported full-arch frameworks obtained through a digital scan and the herein described technique have an accuracy comparable to those obtained with traditional plaster impression.

An Analysis of Different Techniques Used to Seal Post-Extractive Sites-A Preliminary Report.

BACKGROUND: Bone grafting in post-extractive site improves tissue regeneration. Soft tissue sealing of the grafted post-extractive alveolus is supposed to limit microbiological contamination from the oral cavity and to stabilize the coagulum. Several techniques are presented in the literature to reach this goal using different heterologous matrices or autogenous grafts. In addition, recently, a technique based on the use of granulation tissue in the post-extractive alveolus has been proposed. AIM: To compare the effect of different graft sealing approaches in post-extractive sites by qualitatively evaluating their healing process. MATERIALS AND METHODS: This retrospective investigation included 30 patients requiring post-extractive site regeneration in the aesthetic area. Post-extractive sites were regenerated using a bovine bone matrix and patients were divided into three groups (10 patients in each group) according to the material used to seal the alveolar socket. In the UD group, the granulation tissue was used to seal the defect; in the PC group, epithelial-connective soft tissue graft was used, and in the COLL group, a collagen-based membrane was employed. Images of the post-extractive sites at different follow-up periods (2 and 12 weeks) were taken and the healing process was blindly evaluated by two independent practitioners. The Healing Index (HI) by Landry, Turnbull and Howley was used to assess the quality of the healing process. The combination of presence/absence of five clinical criteria defines an HI ranging from 1 (very poor) to 5 (excellent). Patients' clinical-pathological variables were recorded. One-way ANOVA was used to explore the dependence of HI on the different socket preservation protocols. RESULTS: Based on clinical-pathological characteristics of the included patients, there were no statistically significant differences among the different sealing techniques. At the 2-week follow-up appointment, HI did not differ among the socket preservation protocols evaluated. Moreover, smoking status and reason for extraction did not influence the HI among the three groups (two-way ANOVA p-value = 0.686, p-value = 0.248 respectively). At the 2-week follow-up appointment, HI was significantly different among the socket preservation protocols investigated. Specifically, the group undergoing collagen-based socket preservation procedure reported the highest HI, compared to the other two techniques (COLL mean 4.60 ± 0.5; PC mean 3.5 ± 1.2; UD mean 3.4 ± 0.5, one-way ANOVA p-value 0.006). CONCLUSIONS: The use of collagen porcine membranes may represent a suitable option to improve the patient healing process in grafted post-extractive sites together with reducing the surgical intervention time compared to alternative sealing techniques.